Gloss print and folded edge
Approve pink density, black line sharpness, surface reflection, score quality, and any whitening or cracking near the fold.
Gloss-laminated wig packaging
Custom Wig Mailer Boxes
Plan custom wig mailer boxes as a one-piece fold-over solid paperboard structure with 300gsm C1S board, pink CMYK offset printing inside and outside, a gloss-laminated exterior, and printed wig-care instructions. Final size, closure hold, film coverage, QR performance, and transit pack-out follow the packed wig and approved sample.
Material
300gsm C1S coated white paperboard, solid single layer with no corrugated flute
Print and finish
Inside and outside CMYK offset print with a confirmed gloss-laminated pink exterior
Structure
One-piece fold-over self-locking paperboard mailer, die-cut and shipped flat
Visual proof points
Review the box, gloss surface, instructions, and wig fit.
These views isolate the purchasing decisions behind custom wig mailer boxes: finished proportions, fold-over assembly, black-on-pink print quality, gloss-film behavior, inside-lid education, and clearance around the packed wig.
Landing page reference
Compare the direct and three-quarter views to confirm lid area, shallow depth, folded sides, and artwork hierarchy.
Structure reference
Review the hinged lid, side flaps, front closure, base depth, and available area for English care instructions.
Closed front-tuck presentation
Check closure alignment, front thumb access, corner formation, and the balance between logo artwork and shipping-label needs.
Packed wig clearance
Fit-test the real wig or bagged unit for compression, curl preservation, removal access, lid clearance, and closure hold.
Customization options
Material, print, and finish options for this wig mailer.
Keep 300gsm C1S, CMYK offset printing, and gloss lamination as the reference baseline, then compare optional effects only where the artwork and budget justify them.
Material / Paperboard
SBS C1S
Single-side coated white board with a clean print face and a natural reverse side.
Review this option
Printing / Print Method
Offset CMYK
Four-color offset printing for detailed artwork and consistent production quality.
Review this option
Finishing / Surface
Gloss Lamination
Reflective protective film for brighter color and a polished retail feel.
Review this option
Finishing / Visual
Spot UV
Selective gloss highlights over logos, patterns, product names, or key graphics.
Review this option
Finishing / Visual
Foil Stamping
Metallic foil detail in gold, silver, rose gold, or custom colors for premium marks.
Review this option
Finishing / Visual
Embossing
Raised detail that adds tactile emphasis to logos or decorative artwork.
Review this optionPrint and finish route
How the artwork effect is produced.
The reference depends on a bright pink field, crisp black illustration, a reflective film surface, and accurate inside-lid education. These elements should be proofed as one converted package, not approved from isolated screen colors.
Full-color offset print inside and outside
CMYK offset printing carries the pink background, black hair illustration, exterior message, and illustrated care instructions across both sides of the blank.
Approve pink color, black density, small-copy legibility, inside/outside registration, and panel orientation on the final board.
Gloss-laminated pink exterior
The confirmed gloss film makes the pink artwork brighter and gives the presentation surface a reflective finish.
Confirm film coverage, gloss level, scuff response, fold whitening, edge lift, and whether the inside also needs film.
Optional premium accents
Spot UV, foil, or embossing can emphasize a logo or illustration without redesigning the entire packaging system.
Keep tooling away from scores and locks, then approve register, pressure, reflection, and added cost on a physical sample.
Artwork element
Production route
Effect on this box
Proofing check
Pink background
CMYK offset print on C1S board
Creates a consistent beauty-category color field inside and outside.
Use a printed contract proof or press target because screen pink will not predict the laminated result.
Black hair illustration and brand copy
Process black or controlled rich-black build
Keeps fine hair lines, product name, slogan, and website legible against pink.
Review fine-line minimums, small type, score clearance, and black set-off risk.
Inside wig-care guide
CMYK instruction panel with line icons
Uses the lid for wearing, cleaning, and storage education.
Confirm natural English copy, reading order, icon accuracy, safe margins, and final dieline orientation.
QR code
Supplied vector code with controlled quiet zone
Connects the physical box to care content or brand support.
Test the final printed code after finishing and converting on multiple phones before release.
Gloss film over scores
Lamination followed by die cutting and creasing
Keeps the high-shine presentation across the folded box.
Approve crease matrix, grain direction, film adhesion, fold whitening, and corner cracking.
Specification summary
Quote-ready specification for custom wig mailer boxes.
The supplied specification is the production baseline. Final dimensions, board caliper, glue points, tolerances, QR file, pack-out, and outer-shipping requirement remain subject to dieline and sample approval.
Packaging type
Custom wig mailer boxes for wigs, hair extensions, bundles, beauty accessories, and lightweight ecommerce presentation
Box structure
One-piece die-cut fold-over paperboard mailer with hinged lid, side-locking geometry, and front tuck closure
Material
300gsm C1S single-side coated white paperboard; solid single-layer stock with no corrugated core
Printing
CMYK offset printing on the exterior and interior, including a full pink field and inside-lid wig-care graphics
Confirmed finish
Gloss lamination; exact exterior-only or two-side film coverage to be confirmed for production
Optional upgrades
Spot UV, hot foil, silver foil, embossing, matte film, or alternative gloss-film coverage after artwork review
Delivery format
Die-cut, scored, glued where required, and supplied flat for storage and fulfillment assembly
Cost drivers
Finished size, print coverage, film coverage, die line, optional tooling, quantity, packing method, and delivery destination
Buyer decisions
Decisions to settle before the wig box sample.
A lightweight solid-paperboard mailer can control presentation and storage volume, but fit, board stiffness, gloss-film folds, closure hold, and parcel protection must be evaluated with the real packed product.
Send these details for a quote.
Folded wig dimensions
Packed height and weight
Target quantity
Exterior artwork
Inside care copy
QR destination
Film coverage
Delivery country
300gsm C1S + gloss film
The supplied bright pink printed reference
Film reflection, fold whitening, and direct-shipping limits need testing
Heavier C1S paperboard
Wigs or accessory sets needing more panel stiffness
Higher material cost and different crease settings
Matte lamination
A lower-glare premium surface
Changes the confirmed glossy visual direction
Corrugated outer shipper
Routes needing stronger parcel protection
Adds material, packing steps, and freight volume
Also suitable for
Hair extension bundlesLace-front wigsClip-in hair setsPonytail extensionsWig care kitsBeauty accessories
Proof before mass production
White structural sample: Checks folded wig clearance, panel stiffness, side locks, front tuck, assembly sequence, and flat-pack recovery.
Printed gloss sample: Checks pink color, black artwork, inside copy, QR scanning, film reflection, scuffing, and fold whitening.
Packed handling test: Checks wig compression, closure hold, corner deformation, label area, abrasion, and whether an outer shipper is required.
Sampling and production path
From folded wig measurements to approved flat-pack production.
Lock the packed product and dieline first, then prove double-sided artwork, gloss-film converting, QR readability, and the intended fulfillment route.
1
Measure the packed wig
Record the folded footprint, packed height, bag or net format, accessory count, total weight, and preferred removal direction.
2
Engineer the one-piece dieline
Build a white sample to test base depth, side locks, front tuck, lid clearance, assembly, and flat-pack recovery.
3
Proof both printed sides
Place exterior branding and the English care guide on the production dieline, then approve pink and black values on C1S board.
4
Laminate and convert a sample
Check gloss level, film adhesion, crease behavior, corner formation, QR scanning, and artwork alignment after die cutting.
5
Approve pack-out and production
Test the real wig, confirm any outer shipper, then lock material, artwork, film, quantity, packing, and delivery inputs.
Structure reference
Why this wig package is a paperboard mailer, not a corrugated shipper.
The product uses a specialty one-piece die-cut folding-carton format with a hinged lid and self-locking sides. Its 300gsm solid C1S construction supports a lightweight, highly printable presentation box, while direct-parcel protection remains a separate pack-out decision.
Flat-pack storage efficiency
The one-piece blank can be supplied flat, reducing storage volume before fulfillment compared with pre-assembled rigid boxes.
Inside and outside communication
Broad exterior panels carry brand artwork while the hinged lid becomes an instruction surface for wig wearing, cleaning, storage, and support.
Lightweight presentation route
Solid paperboard keeps the format lighter and simpler than a rigid box, but stiffness and shipping protection must still follow the packed wig and route.
Structure baseline
One-piece fold-over self-locking paperboard mailer, supplied flat and assembled during fulfillment.
Production baseline
300gsm C1S solid paperboard, inside and outside CMYK offset print, gloss lamination, die cutting, scoring, and required glue points.
Critical approval inputs
Packed wig size and weight, closure hold, pink target, inside copy, QR file, film coverage, fold quality, and label area.
Commercial inputs
Target quantity, artwork readiness, optional tooling, packing method, delivery destination, and transit-test expectation.
Details to prepare for factory review
Folded wig dimensions
Packed height and weight
Target quantity
Exterior artwork
Inside care copy
QR destination
Film coverage
Delivery country
Production FAQ
Questions buyers ask before sampling wig mailer boxes.
What material is used for these custom wig mailer boxes?
The supplied production baseline is 300gsm C1S coated white paperboard. It is a solid single-layer paperboard structure, not corrugated board, and the final stiffness, grain direction, and crease performance should be approved from a converted sample.
Is the pink surface matte or glossy?
This reference uses gloss lamination over the printed pink exterior. Confirm whether the film covers only the outside or both printed sides, then approve reflection, color, fold whitening, and scuff behavior on a physical finish sample.
Can the inside lid include wig care instructions?
Yes. The lid interior can carry English wearing, cleaning, and storage instructions with diagrams. Copy order, icon clarity, safe margins, and any QR destination should be proofed on the final dieline before printing.
Can a QR code be printed inside the wig box?
Yes. Supply the final destination URL and a production-ready vector code. A printed proof should be scanned on multiple phones after lamination and converting, with enough quiet zone around the code.
Can this paperboard wig mailer ship without an outer carton?
Do not assume direct-parcel performance from the presentation structure alone. The 300gsm solid paperboard box should be tested with the packed wig, closure, shipping label, abrasion risk, and carrier route; an outer mailer or shipper may still be needed.
How should the box be sized for a wig?
Send the wig type, folded length and width, packed height, net or bag format, accessory count, and total packed weight. A white sample should confirm compression, curl clearance, removal access, and lid closure.
Which optional finishes can be added?
Spot UV, hot foil, silver foil, embossing, matte lamination, and gloss lamination can be reviewed. Each option changes cost, tooling, fold behavior, artwork clearance, and proof requirements, so upgrades should be selected before the final dieline proof.
What information is needed to quote this wig box?
Send finished dimensions or the packed wig sample, target quantity, delivery country, artwork files, inside copy, QR destination, gloss-film coverage, optional finish requirements, packing method, and any transit-test expectation.
