Matte print at a real fold
A physical proof should confirm the pale pink field, fine star pattern, dark lettering, registration, and score-line finish together.
Palette folding carton solution
Custom Eyeshadow Palette Boxes in Pink Matte SBS
Custom eyeshadow palette boxes in a shallow format using 300gsm SBS C1S, full-color offset printing, matte lamination, and a locking tuck-end structure for compact makeup palettes.
Structure
Shallow one-piece carton with a locking tuck-end closure
Material
300gsm SBS C1S with a coated print face and unprinted reverse side
Production route
CMYK offset print, full matte lamination, die-cutting, scoring, and gluing
Visual proof points
Inspect the print, closure, and palette fit.
These views turn the pink carton reference into practical approval points for structure, artwork, matte finish, closing force, and direct palette clearance.
Landing page reference
The paired view shows the broad artwork panel, slim side depth, and compact retail form used around a flat palette.
Structure reference
The open carton and flat blank show the main panels, tuck flaps, scores, and glue seam that must be checked on the production dieline.
Locking tuck-end detail
Flap depth, tab alignment, board stiffness, and closing force should be tested with the finished palette inside.
Direct palette fit
A close-tolerance carton can hold a standard flat palette without a separate insert when dimensions and removal clearance are approved.
Customization options
Core options for this palette carton.
The specified route combines one-side-coated white paperboard, four-color offset printing, and matte film. Each choice should be approved on the same packed sample.
Material / Paperboard
SBS C1S
Single-side coated white board with a clean print face and a natural reverse side.
Review this option
Printing / Print Method
Offset CMYK
Four-color offset printing for detailed artwork and consistent production quality.
Review this option
Finishing / Surface
Matte Lamination
Low-sheen film finish for a calm premium surface with added protection.
Review this optionPrint and finish route
How the artwork effect is produced.
The design depends on restrained color contrast rather than added decorative processes: a pale pink field, printed star pattern, pink script, and black product copy under full matte film.
CMYK artwork system
Four-color offset printing carries the pale pink base, low-contrast star pattern, pink script, and black copy in one production route.
Approve color targets and fine-line visibility on the selected SBS C1S.
Full matte lamination
A low-glare film softens reflection and helps the printed exterior resist fingerprints and routine handling marks.
Review film adhesion, corner wrap, scuffing, and score behavior on a finished sample.
Die-cut and score control
One cutting and creasing layout forms the carton outline, tuck tongue, locking tabs, glue seam, and fold lines.
Pack the actual palette to test closure hold, panel bowing, and repeatable assembly.
Artwork element
Production route
Effect on this box
Proofing check
Pale pink background
Full-coverage CMYK offset print
Creates the main color field across the broad face and shallow side panels.
Approve color on SBS C1S and compare large solid areas for consistency.
Star line pattern
Low-contrast CMYK line art
Adds quiet surface detail without embossing or a separate finishing plate.
Keep lines visible after matte lamination without letting them compete with product copy.
Pink script and black copy
CMYK artwork with fine-text control
Separates the expressive product name from practical palette information.
Keep text clear of scores, tuck flaps, glue zones, and barcode quiet areas.
Low-glare surface
Full matte lamination
Reduces hard reflection and adds handling protection to the printed face.
Inspect film tension and edge adhesion around the shallow folded corners.
Specification summary
Production baseline for custom eyeshadow palette boxes.
Use these supplied specifications as the starting route, then lock the finished size and tolerances around the real palette sample.
Packaging type
Shallow custom eyeshadow palette box for a compact flat makeup palette
Structure
One-piece locking tuck-end folding carton with a single opening flap, no hook, no window, and no separate insert
Paperboard
300gsm SBS C1S with a smooth coated printing face and an unprinted natural reverse side
Printing
CMYK offset printing for the pale pink field, star pattern, pink script, and black product copy
Surface finish
Full matte lamination with no foil, spot UV, embossing, or debossing in the baseline specification
Converting
Die-cutting, scoring, glue application, folding, and closure testing around the approved production dieline
Supply format
Flat or pre-glued supply route to be confirmed against the packing line and final lock design
Quote drivers
Finished size, palette weight, board yield, ink coverage, matte film, quantity, packing format, and delivery destination
Buyer decisions
Fit the carton to the palette before locking artwork.
The structure is efficient only when the finished palette dimensions, removal clearance, board stiffness, closing force, and artwork folds are reviewed together.
Send these details for a quote.
Palette length, width, and depth
Packed palette weight
Artwork files
Target quantity
Fit tolerance
Packing method
Flat or pre-glued supply
Delivery country
300gsm SBS C1S
Detailed outside print with a blank uncoated interior
Not intended for artwork that requires a coated inside print face
SBS C2S
Projects that need smooth printing on both sides
Adds cost where the interior remains blank
Full matte lamination
Low glare and stronger handling protection
Adds film and requires careful score and edge review
Matte coating
A film-reduction alternative for suitable artwork
Usually provides less scuff and fingerprint resistance than lamination
Also suitable for
Blush palettesContour palettesHighlighter palettesBrow kitsPressed powder compactsSlim cosmetic sets
Proof before mass production
Dieline proof: Checks lock geometry, glue seam, artwork panels, score positions, and flat-to-assembled conversion.
Color and finish proof: Checks pink consistency, fine star lines, black copy, matte glare, and fold quality.
Packed fit test: Checks insertion, removal, internal movement, corner pressure, panel bowing, and closure hold.
Sampling and production path
From palette measurements to a repeatable carton run.
Approve the physical fit, artwork proof, matte surface, and pack-out sequence before the production dieline and converting settings are released.
1
Measure the finished palette
Use the production compact, including hinges, clasps, corner radii, and any outer film, to set internal clearance.
2
Confirm the dieline and supply format
Review tuck direction, lock tabs, glue seam, score lines, and whether cartons arrive flat or pre-glued for the packing line.
3
Proof CMYK on SBS C1S
Check the pale pink field, subtle star artwork, pink script, black copy, and small text on the actual board.
4
Apply and inspect matte film
Review glare, fingerprints, scuffing, corner adhesion, fold cracking, and color shift after lamination.
5
Approve a packed sample
Test insertion, removal, closure hold, stacking, and routine handling with the finished palette before production.
Structure reference
Use a locking tuck-end carton for a close palette fit.
This shallow folding-carton route keeps the palette lightweight and panel-rich. The closest standard structure is a tuck-end box, adjusted with the locking details shown on the approved dieline.
Broad artwork face
The flat rectangular format gives the front and back panels enough space for collection graphics, product naming, shade information, ingredients, and barcode planning.
Direct-fit efficiency
Accurate internal dimensions can hold a standard palette without a separate insert, reducing material and packing steps while keeping removal practical.
Flat supply route
A one-piece die-cut carton can be stored and supplied flat or pre-glued according to the approved lock design and packing workflow.
Structure baseline
Shallow one-piece locking tuck-end folding carton sized around one flat makeup palette.
Production route
300gsm SBS C1S, CMYK offset print, full matte lamination, die-cutting, scoring, gluing, and packed fit approval.
Main cost drivers
Finished size, paperboard yield, ink coverage, matte film, quantity, packing format, and delivery destination.
Project details needed
Palette dimensions and weight, artwork, quantity, fit tolerance, supply format, packing method, and destination.
Details to prepare for factory review
Palette length, width, and depth
Packed palette weight
Artwork files
Target quantity
Fit tolerance
Packing method
Flat or pre-glued supply
Delivery country
Production FAQ
Questions before sampling eyeshadow palette packaging.
What structure is used for these custom eyeshadow palette boxes?
The reference uses a shallow one-piece folding carton with a single tuck opening and locking tabs. The final flap direction, lock geometry, glue seam, and finished dimensions should be confirmed on the production dieline.
Why use 300gsm SBS C1S for a palette carton?
SBS C1S provides a smooth coated outer face for detailed CMYK artwork and an uncoated reverse side that suits an unprinted interior and glue areas. The final board weight should still be checked against palette size and weight.
Is the star pattern embossed into the paperboard?
No. The pale star pattern is part of the CMYK artwork. It creates a quiet background detail without adding embossing tooling or another finishing process.
Does this eyeshadow palette box need an insert?
Not always. A standard flat palette can use a close direct fit when the carton clearance and closure hold are tested. Fragile pans, mirrors, unusual shapes, or loose internal movement may require another support route.
What should be checked on the matte-laminated proof?
Review the pale pink color, fine pattern visibility, black copy, handwriting-style artwork, fold registration, score cracking, glare level, fingerprints, and surface scuffing on the selected SBS board.
What information is needed to quote this palette box?
Send the closed palette length, width, depth, packed weight, artwork file, target quantity, packing method, delivery country, and any required fit tolerance or surface test.
Can this carton be supplied flat?
Yes. The one-piece paperboard carton can be planned for flat delivery and simple assembly, subject to the approved locking structure, glue setup, packing line, and final dimensions.
